Industrial Mixers
"CONTACT US" Additional Information
Index of Information Industrial Mixers Contact Industrial Portable Mixers Industrial Mixer Products About IPM Complete order information Site Map: Industrial Mixers
Bung Mounted Drum Barrel Mixer Selections
Economy Direct Driven Portable Mixers
Portable Mixers
Top Entering Mixers
Mixer Selection Guide
Tips: Designing a Mixing System
Request a catalog.
Quick Electron Quote
Instructions for obtaining Adobe Documents.
Hydrofoil Mixers
Home>Portable Mixer>SS >SHGR> TEM> Heavy Duty Gear Driven Fixed Flanged Plate Mounted Mixers
Heavy Duty Gear Driven: Pedestal Mounted - Fixed Plate or Angle Riser Mounted Portable Mixers Model AQPG - Specifications
Heavy Duty Gear Driven Fixed Plate 
    or Angle Riser Mounted Portable Mixers
Pedestal Mounted Heavy Duty Gear Driven Fixed Flanged Plate or Angle Riser Mounted Mixers
Mixer Selections (Sizing): Viscosity vs. Tank Volume, etc.

Industrial Portable MixersHeavy Duty Gear Driven Fixed Flanged Plate Mounted Mixers manufactures pedestal mounted, with coupling above the mixers mounting surface, heavy duty gear driven fixed base plate or angle riser mounted portable mixers.  We also have numerous other open and closed tank (hermetically seals and pressurized} mixer design mounting options available.  Please reference our mixer specifications and pricing matrix below.  

Today's gear driven portable mixing applications demand durable process equipment accompanied by total support for your mixing needs.  We offer a complete line portable mixers.   We provide superior materials of construction throughout to give each mixer the strength & reliability that ensures the performance to the standards of each Industrial Portable Mixer design.   

 Industrial Portable Mixer Model AQPG is our heavy duty gear driven top entering open tank fixed mounted non-painted corrosion resistant mixer design which is completely constructed of both aluminum and stainless steel components which is suitable for 95%+ of all mixing applications..  Model AQOG features heavy gage high strength cast aluminum housing with oversized bearings and all external stainless steel hardware  Our base plate is constructed of either carbon steel or an optional 316L {low carbon} stainless steel with 316SS hardware for mounting to a suitable horizontal support structure such as spanning beams or a tank lid assembly.  The gearbox assembly features a heavy gage high strength corrosion resistant cast aluminum housing assembly.  The Pedestal Mount locates the rigid/removable coupling above the mixers mounting surface for ease of installation and to remove the coupling from direct process contact.  The pedestal elevation also aids in oil change servicing.The single helical gear reduction is 98% efficient constructed of durable high strength (4140 steel) with a minimum AGMA Service Factor that can significantly exceed 1.5 (SF > 1.5 is classified moderate shock, continuous 24 hour per day), based upon the motor nameplate rating.  Please note that our gear reduction is not made from inefficient “soft-wear” worm gearing or cheap planetary gearing.  Our design is of single purpose high reliability construction where it is not adapted modularly with dual purpose components and matched with a cheap commercially available gear-motor assembly with inherent design limitations.  The oversized bearings are designed to achieve superior L10 bearing lives ensuring long lasting mixer life. The single purpose one-piece output shaft is precision aligned with the housing, bearings, and gearing to ensure precise alignment to minimize shaft deflection Please note that non-aligning, non-concentric couplings are not used. To enable ease of installation the output shaft features either a precision quick release {hollow shaft} chuck or a flanged coupling configuration either constructed of high strength steel or 316 stainless steel.  The flanged coupling assembly feature a precise raised face rabbet fit to assure alignment.  The agitator shaft is measured from the mixers mounting base.  Numerous impeller configurations for high flow or shear capability are available from stock.  Standard motor options include: 1750 RPM's either 115/208-230 Volt, 1-phase, IP55, 60 hertz or 208-230/460 Volt, 3-Phase, 50/60 Hertz, IP55, Class F insulated, T3C temperature rise, inverter ready  5:1 constant torque, TEFC (Totally Enclosed Fan Cooled) designs with commercially standard paint.  Available motor upgrades or options include:  

Food grade” high pressure wash down all stainless or with electrostatically white epoxy finish, with tropicalized class F insulation, TENV  or TEFC, and a 1.15 Service Factor  

Explosion Proof - Class I, Group D or C&D, Class II, Group F&G, T3C)  

Intrinsically safe {suitable for explosion proof environments) variable speed rotary vane or piston type air motors totally enclosed with air muffler.

AC & DC variable speed motor options.

All wetted parts will be constructed of the superior corrosion resistant 316L {Low Carbon} Stainless Steel with 316SS hardware.  Each mixers nameplate will specifically state, "Manufactured in USA" and will be built with pride and dedication.  Some application such as for food processing are available unpainted where an optional upgrade to paint the motor & gearbox with a chemical resistant paint option is available upon request.  Please note, these mixers are far from common cheap throw away designs.  After years of reliable service, these mixer are designed to be easily and reliably rebuilt and put back into service.  

01.28.13

Industrial Portable Mixers 
2715 Tuller Parkway| Dublin, OH 43017-2013 USA
Phone: (717) 614-1524 | Fax: (636) 548-1734 
Web Site: www.industrialportablemixer.com