| |
Industrial Portable Mixer Model AQG is
our heavy duty gear driven top entering open tank swivel mounted mixer.
Model AQG features heavy gage high strength cast aluminum housing with oversized
bearings. Our heavy gage aluminum swivel C-Clamp (vertical support)
or "Bolt-On" Cup-Plate (horizontal support) is suitable for mounting
to a suitable support structure, and is provided with standard zinc plated steel
hardware or low cost optional 316SS hardware. The Model AQG features a 98% efficient high strength
(4140 steel) single helical 5:1 gear reduction with an AGMA service factor that
exceeds 1.5 (based upon motor horsepower). Please note that our gear
reduction is not made from inefficient "soft wear" worm gearing, is
not a low quality planetary gear, nor is our design adapted to a inexpensive
gear motor design. Motor options include both single and three phase TEFC
(Totally Enclosed Fan Cooled), XP (Explosion Proof), intrinsically safe variable
speed Air Motors and variable speed motor options.
The solid one-piece output shaft is precision aligned with the housing,
bearings, and gearing to minimize shaft deflection and enable ease of
installation. Please note that non-aligning, non-concentric split
couplings are not used. Shaft lengths are as indicated measured from the
mixers mounting base with either hydrofoils or optional props or
propellers. All wetted parts will be constructed of 316L {Low
Carbon) Stainless Steel with 316SS hardware. Each mixer will be
Manufactured in USA and will be built with pride and dedication.
04.05.13
|