Industrial Mixers
"CONTACT US" Additional Information
Index of Information Industrial Mixers Contact Industrial Portable Mixers Industrial Mixer Products About IPM Complete order information Site Map: Industrial Mixers
Bung Mounted Drum Barrel Mixer Selections
Economy Direct Driven Portable Mixers
Portable Mixers
Top Entering Mixers
Mixer Selection Guide
Tips: Designing a Mixing System
Request a catalog.
Quick Electron Quote
Instructions for obtaining Adobe Documents.
Hydrofoil Mixers
Home>Portable Mixer>SS>CM>TFIM>Economy Gear Driven Swivel Wall Mounted Mixers
Economy Gear Driven Swivel-Wall Mounted Portable Mixers Model AQWE - Specifications
Pricing Matrix: Economy Gear Driven Swivel Mounted Clamp or Cup Plate Mounted Portable Mixers
Mixer Selections (Sizing): Viscosity vs. Tank Volume, etc.

Economy Gear Driven Swivel Wall Mounted MixersIndustrial Portable Mixers manufactures economy swivel mounted wall mounted gear driven portable mixers.  We also have numerous other open and closed tank (hermetically seals and pressurized} mixer design mounting options available.  Please reference our mixer specifications and pricing matrix below. 

Today's economy gear driven swivel-wall mounted portable mixing applications demand durable process equipment accompanied by total support for your mixing needs.  We offer a complete line portable mixers.  We provide superior materials of construction throughout to give each mixer the strength & reliability that ensures the performance to the standards of each Industrial Portable Mixer design.

MODEL AQWE SPECIFICATIONS: Economy Gear Driven Mixer
Industrial Portable Mixers Models AQWE is our economy top entering open tank swivel wall mounted mixer with a 316L {Low Carbon} Stainless Steel wall mounting bracket for mounting to a suitable support structure. The cast iron gearbox with commercially standard paint features a 98% efficient high strength single helical gear reduction with a minimum AGMA Service Factor of 1.5 based on motor nameplate.  Please note that our gear reduction is not made from inefficient "soft wear" worm gearing, is not a low quality planetary gear.  The removable agitator/gearbox coupling is constructed of 316LSS stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation.  Please note that non-aligning, non-concentric split couplings are not used.  Standard motor options include: 1750 RPM's either 115/208-230 Volt, 1-phase, IP55, 60 hertz or 208-230/460 Volt, 3-Phase, 50/60 Hertz, IP55, Class F insulated, T3C temperature rise, inverter ready  5:1 constant torque, TEFC (Totally Enclosed Fan Cooled) designs with commercially standard paint.  Available motor upgrades or options include:  

Food grade” high pressure wash down all stainless or with electrostatically white epoxy finish, with tropicalized class F insulation, TENV  or TEFC, and a 1.15 Service Factor  

Explosion Proof - Class I, Group D or C&D, Class II, Group F&G, T3C)  

Intrinsically safe {suitable for explosion proof environments) variable speed rotary vane or piston type air motors totally enclosed with air muffler.

AC & DC variable speed motor options.

The agitator shaft is measured from the mixers mounting and is supplied with maximum effect folding propeller(s) as specified in the pricing table.  All wetted parts will be constructed of 316L {Low Carbon} Stainless Steel (with 316SS hardware).    Each mixers nameplate will specifically state, "Manufactured in USA" and will be built with pride and dedication.  Motor/gearbox chemical resistant paint optional upgrade is available upon request.  See pricing link above.

01.28.13

Industrial Portable Mixers 
2715 Tuller Parkway| Dublin, OH 43017-2013 USA
Phone: (717) 614-1524 | Fax: (636) 548-1734 
Web Site: www.industrialportablemixer.com