| |
Home>Portable
Mixer>SS>CM>TFIM>Economy
Direct Driven Drum Lid Mixer
Economy Direct Driven Drum Lid Mounted
Portable Mixers Model AQL - Specifications
Fixed Mounted
Economy Direct Driven Drum Lid Mounted Arrangements.
|
|
Industrial
Portable Mixers manufactures
an economy direct driven fixed drum lid mounted portable
mixers. We also have numerous other open and closed tank (hermetically seals and
pressurized} mixer design mounting options available. Please
reference our mixer specifications and pricing matrix below.
Today's economy direct driven
drum lid mounted portable mixing applications demand durable process equipment
accompanied by total support for your mixing needs. We offer a complete
line portable mixers. We provide superior materials of construction
throughout to give each mixer the strength & reliability that ensures the
performance to the standards of each Industrial Portable Mixer design.
Industrial
Portable Mixer Models AQL
top entering open tank fixed mounted mixer with a 304 Stainless Stainless Steel Drum Lid Assembly. The motor coupling will be
constructed of 316L {Low Carbon} stainless steel for precise alignment to minimize shaft
deflection and to enable ease of installation. Standard motor options include: 1750 RPM's either 115/208-230 Volt,
1-phase, IP55, 60 hertz or 208-230/460 Volt, 3-Phase, 50/60 Hertz, IP55, Class F
insulated, T3C temperature rise, inverter ready 5:1 constant torque, TEFC (Totally
Enclosed Fan Cooled) designs with commercially standard paint. Available
motor upgrades or options include:
|
Food grade” high pressure wash down
all stainless or with electrostatically white epoxy finish, with
tropicalized class F insulation, TENV or
TEFC, and a 1.15 Service Factor
|
|
Explosion Proof - Class I, Group
D or C&D, Class II, Group F&G, T3C)
|
|
Intrinsically safe {suitable for
explosion proof environments) variable speed rotary vane or piston type air
motors totally enclosed with air muffler. |
|
AC
& DC variable
speed motor options. |
|
The agitator shaft and propeller are as specified, which are measured
from the mixers mounting base. Standard pitch propellers are also available upon
request. All wetted parts will be constructed of
316L {Low Carbon} Stainless Steel. All hardware will be 316SS. Each mixers
will be "Manufactured in USA" and will be built with pride
and dedication.
01.28.13
|