| | Home>Portable
Mixer>SS>CM>TFIM>Economy
Direct Driven Bung Mounted Mixer
Economy Direct Drive Bung
Entering Portable Mixer - Specifications
 |
 |
Economy Bung Mounted Direct Driven
Portable Mixers
 Industrial Portable Mixer
manufactures a high quality line of Heavy Duty Direct Driven Bung Mounted
Portable Mixers available with maximum effect folding propellers typically used
in 55 gallon drum applications (specifications below).
Today's economy direct driven
bung mounted mixing applications demand
durable process equipment accompanied by total support for your mixing
needs. We offer a complete line portable mixers. We provide superior materials of
construction throughout to give
each mixer the strength & reliability that ensures the performance to the
standards of each Industrial Portable Mixer design.
Industrial
Portable Mixer Model AQB
is our economy top entering bung mounted direct drive mixer. Our
rugged 2" NPT Bung assembly is constructed of corrosion resistant 316L {Low
Carbon} Stainless Steel (316SS Hardware). The motor coupling will also be
constructed of 316LSS stainless steel for precise alignment to minimize shaft
deflection and to enable ease of installation. Standard motor options include: 1750 RPM's either 115/208-230 Volt,
1-phase, IP55, 60 hertz or 208-230/460 Volt, 3-Phase, 50/60 Hertz, IP55, Class F
insulated, T3C temperature rise, inverter ready 5:1 constant torque, TEFC (Totally
Enclosed Fan Cooled) designs with commercially standard paint. Available
motor upgrades or options include:
 |
Food grade” high pressure wash down
all stainless or with electrostatically white epoxy finish, with
tropicalized class F insulation, TENV or
TEFC, and a 1.15 Service Factor
|
|
Explosion Proof - Class I, Group
D or C&D, Class II, Group F&G, T3C)
|
|
Intrinsically safe {suitable for
explosion proof environments) variable speed rotary vane or piston type air
motors totally enclosed with air muffler. |
|
AC
& DC variable
speed motor options. |
|
The agitator shaft and maximum effect propeller(s) are as specified, which are measured
from the mixers mounting base. All wetted parts will be constructed of
316L {Low Carbon} Stainless Steel (with 316SS hardware). Each
mixers will be "Manufactured in USA" and
will be built with pride and dedication.
01.28.13
|
