| | Home>Portable
Mixer>SS>CM>TFIM>Economy
Gear Driven Fixed Flanged Plate Mounted Mixers
Economy Gear Driven
Fixed Plate Pedestal Mounted Portable Mixers Model AQPE - Specifications
 |
 |
 Industrial Portable Mixers
manufactures economy fixed plate mounted gear driven portable
mixers. We also have numerous other open and closed tank (hermetically
seals and pressurized} mixer design mounting options available. Please
reference our mixer specifications and pricing matrix below.
Today's gear driven portable mixing applications demand
durable process equipment accompanied by total support for your mixing
needs. We offer a complete line portable mixers. We provide superior materials of construction throughout to give
each mixer the strength & reliability that ensures the performance to the
standards of each Industrial Portable Mixer design.
Industrial Portable Mixer Model AQPE
top entering open tank fixed mounted mixer with a 316L {Low
Carbon} Stainless bolt-on pedestal base plate assembly for
mounting to a suitable horizontal or angled support structure. The motor
coupling is located
above the mixers mounting base and will be
constructed of 316L {Low Carbon} stainless steel for precise alignment to minimize shaft
deflection and to enable ease of installation. 1750 RPM's either 115/208-230 Volt,
1-phase, IP55, 60 hertz or 208-230/460 Volt, 3-Phase, 50/60 Hertz, IP55, Class F
insulated, T3C temperature rise, inverter ready 5:1 constant torque, TEFC (Totally
Enclosed Fan Cooled) designs with commercially standard paint. Available
motor upgrades or options include:
 |
Food grade” high pressure wash down
all stainless or with electrostatically white epoxy finish, with
tropicalized class F insulation, TENV or
TEFC, and a 1.15 Service Factor
|
|
Explosion Proof - Class I, Group
D or C&D, Class II, Group F&G, T3C)
|
|
Intrinsically safe {suitable for
explosion proof environments) variable speed rotary vane or piston type air
motors totally enclosed with air muffler. |
|
AC
& DC variable
speed motor options. |
|
The agitator shaft is measured from the mixers mounting and is supplied
with maximum effect folding propeller(s) as specified in the pricing
table. All wetted parts will be constructed of
316L {Low Carbon} Stainless Steel (with 316SS hardware). Each
mixers nameplate will specifically state, "Manufactured in USA" and
will be built with pride and dedication. Motor/gearbox chemical resistant
paint optional upgrade is available upon request. See pricing link above.
01.28.13
|
