Industrial Portable Mixers manufactures Low Speed RPM Low Headroom Fixed Base Plate or Angular Offset Angle Riser double helical parallel shaft gear driven mixers.  We also have numerous other open and closed tank (hermetically seals and pressurized} mixer design mounting options available.  Please reference our mixer specifications and pricing matrix below.  

Today's gear driven portable mixing applications demand durable process equipment accompanied by total support for your mixing needs.  We offer a complete line portable mixers.   We provide superior materials of construction throughout to give each mixer the strength & reliability that ensures the performance to the standards of each Industrial Portable Mixer design.   

Industrial Portable Mixer Model AQP3X is our heavy duty gear driven top entering open tank fixed mounted non-painted corrosion resistant mixer design which is completely constructed of both aluminum and stainless steel components which is suitable for 95%+ of all mixing applications. The ACUMIX Model AQO3X features a heavy gage high strength cast aluminum housing with oversized bearings and all external stainless steel hardware. The Pedestal Mount locates the rigid/removable coupling above the mixers mounting surface for ease of installation and to remove the coupling from direct process contact.  The pedestal elevation also aids in oil change servicing.  Our base plate is constructed of either carbon steel or an optional 316L {low carbon} stainless steel with 316SS hardware for mounting to a suitable mixer support structure.   The ACUMIX Model AQO3X features a 96% efficient double helical gear reduction with gearing that is constructed of high strength 86L20 carburized and hardened steel with an AGMA Service Factor of that meets or exceeds 1.5 based upon the motor nameplate rating (SF > 1.5 is classified moderate shock, continuous 24 hour per day). We comply with AGMA’s strict requirement that no gear reduction exceeds a ratio of 7:1. The model AQO3X provides a flexible motor coupling interface between the motor and gearing to ensure alignment and provide ease of installation and also to absorb inherent shock loads to safeguard the overall life of the mixer.  The L10 bearing life either meets or exceeds 100,000 hours (11.4 years) when the mixer is fully loaded 24/7.  The oversized bearings are designed to achieve superior L10 bearing lives ensuring long lasting mixer life.  Please note that our gear reduction is not made from inefficient “soft-wear” worm gearing or cheap planetary gearing.  Our design is of single purpose high reliability construction where it is not adapted modularly with dual purpose components such as matching cheap commercially available gear-motor assemblies that have inherent design limitations.  The single purpose solid one-piece gearbox output is precision aligned with the gearbox housing, bearings and gearing to ensure precise alignment to minimize run out.  Please note that non-aligning, non-concentric split couplings are never used.  To enable ease of installation the solid one-piece output shaft features either a precision quick release {hollow shaft} chuck or a flanged rigid/removable coupling assembly configuration that is constructed either out of high alloy {strength} carbon steel or an optional 316L {Low Carbon} stainless steel with 316SS hardware.  The flanged rigid removable coupling assembly features a rigid flanged coupling half, as part of the solid one-piece output shaft, with a precise face rabbet to assure alignment, and a removable flanged coupling, which ensures a precision alignment with the gearbox housing, bearings, and gearing to minimize agititator shaft deflection and gearbox tolerance run out. The coupling assembly also enables ease of installation. Also included are corrosion resistant brass & stainless fittings for lube points and also features a pressure release and a clear shatter resistant plastic lube site.  The pressure release normalize the internal heated oil pressure as it expands, from a cold start, where the clear lube site will allow you to externally observe the gearboxes oil level.  The agitator shaft is measured from the mixers mounting base.  Numerous impeller configurations for high flow or shear capability are available from stock.  Standard motor options include: 1750 RPM's either 115/208-230 Volt, 1-phase, IP55, 60 hertz or 208-230/460 Volt, 3-Phase, 50/60 Hertz, IP55, Class F insulated, T3C temperature rise, inverter ready  5:1 constant torque, TEFC (Totally Enclosed Fan Cooled) designs with commercially standard paint.  Available motor upgrades or options include: