Industrial Portable Mixers Model AQ3MX & Model AQ4MX is our heavy duty gear driven top entering closed tank fixed mounted mixer design. Model AQM3/4X features an integral heavy gage high strength cast aluminum housing with oversized bearings. Our standard flange design features 316L {low carbon} stainless steel wetted parts with a 5", 6" or 8" 150# ANSI drilled options for mounting to a suitable support structure such as a tank flange. This standard mechanical seal configurations, either wet or dry running, will achieve a pressure from full vacuum to 150 PSIG. environment. The model AQ3/4MX features a 98% efficient high strength (4140 steel) single helical 5:1 gear reduction. Please note that our gear reduction is not made from inefficient "soft wear" worm gearing, is not a low quality planetary gear, nor is our design adapted to a inexpensive gear motor design. Motor options include both single and three phase TEFC (Totally Enclosed Fan Cooled), XP (Explosion Proof), intrinsically safe variable speed Air Motors and variable speed motor options. The solid one-piece output shaft is precision aligned with the housing, bearings, and gearing to minimize shaft deflection and enable ease of installation. A removable coupling will be located above the mechanical seal to aid both installation and seal maintenance. Please note that non-aligning, non-concentric split couplings are not used. All wetted parts will be constructed of 316L {Low Carbon) Stainless Steel with 316SS hardware. Each mixer will be Manufactured in USA and will be built with pride and dedication. 01.25.13 |
Industrial
Portable Mixers |