| |
Food Grade Portable Mixers for Food Processing Applications - Specifications
Industrial Portable Mixers
manufactures a low cost inexpensive food grade portable mixers for
food processing mixing applications. The near full vacuum to low pressure design features
sanitary fittings or connections to mount directly to your quick release tank
ferrules. We also have numerous other open and closed tank (hermetically
seals and pressurized} mixer design mounting options available. Please
reference our mixer specifications and pricing matrix below.
Today there are numerous food
grade mixing applications that need only an inexpensive mixer with a modest
pressure range from near full vacuum to 30 PSIG. This includes the
degassing of gels, dryers, adhesives, pharmaceuticals, cosmetics and personal
care products. Whether the food processing requires a disperser or a
blender we have an inexpensive solution featuring mounting options to mount to
your quick connect tank sanitary ferrules or fittings. Food processing mixing applications demand
durable process equipment accompanied by total support for your mixing
needs. We offer a complete line portable mixers. We provide superior materials of construction throughout to give
each mixer the strength & reliability that ensures the performance to the
standards of each Industrial Portable Mixer design.
|
Industrial Portable Mixers Model AQTSG is
our heavy duty gear driven top entering open tank swivel mounted mixer.
Model AQTG features heavy gage high strength cast aluminum housing with oversized
bearings. The 3” or 4" 16AMP adapter is constructed of 316L {Low Carbon} Stainless Steel for
mounting to a suitable tank ferrule or sanitary fitting. The tank ferrule can be
located using an angular offset mounting arrangement, which eliminates the need
for in-tank anti-swirl baffles to eliminate potential in-tank sites for
contamination or hang-up.
This configuration will achieve near full
vacuum to 30 PSIG. The ACUMIX Model
AQTSG features a 98% efficient
single helical gear reduction of 5:1. They
gears are constructed of high strength (4140 Steel) with a AGMA Service Factor
that readily exceeds 1.5 based on the motor nameplate rating (SF > 1.5
is classified moderate shock, continuous 24 hour per day).
The gear box assembly shall be supplied with food grade lubricant.
The L10 bearing life of the Model AQTSG mixer assembly readily exceeds
100,000 hours {11.41 years}. Please
note that our gear reduction is not made from inefficient “soft-wear” worm
gearing, cheap planetary gearing, nor is our design adapted to a cheap
commercially available gear-motor assembly.
The motor is an energy savings high pressure wash down 208-230/460 Volt,
60 Hertz, 3 Phase, either TENV (Non-Ventilated) or TEFC (Fan Cooled) design with
an electrostatically applied white epoxy finish with tropicalized class F
insulation and a 1.15 Service Factor.
Motor options include single phase, premium efficient, intrinsically safe variable
speed air motors and variable speed motor options. Un unpainted corrosion
resistant design using external stainless steel hardware with an all stainless
motor is also available.
The solid one-piece output shaft features our ACUMIX quick release chuck design,
which is constructed of 316L {low carbon} stainless steel with 316SS external
hardware. This output shaft design is precision aligned with the housing,
bearings, and gearing to minimize shaft deflection and enable ease of
installation. Please note that non-aligning, non-concentric split
couplings are not used. The agitator shaft length is as indicated with a single (1) removable three
bladed high efficiency hydrofoil
impeller with inherent stabilization. We have available numerous other impeller
options suitable for high viscosity, dispersion with additional types for
various other process conditions. All wetted parts will be constructed of 316L {Low
Carbon) Stainless Steel with 316SS hardware. Each mixer will be
Manufactured in USA and will be built with pride and dedication.
Additional features include:
| Non-painted corrosion
resistant designs. |
| USDA and/or food grade
coatings for the motor-gearbox assemblies to protect against corrosive
external environments. |
| Food grade agitator
shaft & impeller coatings to either protect against salts and brines or
to provide addition protection to ward off verdigrees. |
| Polished
surfaces for the agitator shaft and impeller assemblies for easy clean-up. |
| All stainless steel
230/460 Volt electric wash down duty motors |
01.21.13
|