MODEL AQE SPECIFICATIONS: Economy Gear Driven
Mixer
Industrial
Portable Mixers Models AQE
is our economy top entering open tank swivel mounted mixer with either a 316L {Low
Carbon} Stainless Steel C-Clamp {for vertical mounting surface like a tank wall} or a 316L {Low
Carbon} Stainless Steel "Bolt-on" Cup-Plate {for a horizontal mounting
surface} for
mounting to a suitable support structure. The cast iron gearbox with commercially standard paint features a 98% efficient high strength single helical gear reduction with a
minimum AGMA Service Factor of 1.5 based on motor nameplate.
Please note that our gear
reduction is not made from inefficient "soft wear" worm gearing, is
not a low quality planetary gear. The removable
agitator/gearbox coupling is
constructed of 316LSS stainless steel for precise alignment to minimize shaft
deflection and to enable ease of installation. Please
note that non-aligning, non-concentric split couplings are not used. Standard motor options include: 1750 RPM's both 115/208-230 Volt,
1-phase, 60 hertz and 208-230/460 Volt, 3-Phase, 50/60 Hertz, TEFC (Totally
Enclosed Fan Cooled) designs with commercially standard paint. Available
motor upgrades or options include:
 |
Food grade” high pressure wash down
all stainless or with electrostatically white epoxy finish, with
tropicalized class F insulation, TENV or
TEFC, and a 1.15 Service Factor
|
|
Explosion Proof - Class I, Group
D or C&D, Class II, Group F&G, T3C)
|
|
Intrinsically safe {suitable for
explosion proof environments) variable speed rotary vane or piston type air
motors totally enclosed with air muffler. |
|
AC
& DC variable
speed motor options. |
The agitator shaft is measured from the mixers mounting and is supplied
with maximum effect folding propeller(s) as specified in the pricing
table. All wetted parts will be constructed of
316L {Low Carbon} Stainless Steel (with 316SS hardware). Each
mixers nameplate will specifically state, "Manufactured in USA" and
will be built with pride and dedication. Motor/gearbox chemical resistant
paint optional upgrade is available upon request. See pricing link above.
03.08.10
Industrial Portable Mixers
manufactures economy swivel mounted C-Clamp or Cup Plate mounted gear driven portable
mixers. We also have numerous other open and closed tank (hermetically
seals and pressurized} mixer design mounting options available. Please
reference our mixer specifications and pricing matrix below. 
