Industrial Mixers
"CONTACT US" Additional Information
Index of Information Industrial Mixers Contact Industrial Portable Mixers Industrial Mixer Products About IPM Complete order information Site Map: Industrial Mixers
Bung Mounted Drum Barrel Mixer Selections
Economy Direct Driven Portable Mixers
Portable Mixers
Top Entering Mixers
Mixer Selection Guide
Tips: Designing a Mixing System
Request a catalog.
Quick Electron Quote
Instructions for obtaining Adobe Documents.
Hydrofoil Mixers
Home>Portable Mixer>SS>CM>TFIM>Economy Gear Driven Drum Lid Mounted Mixers
Economy Gear Driven Drum Lid Low Headroom Mounted Portable Mixers Model AQLE - Specifications
Fixed
Mounted Economy Gear Driven Drum Lid Mounted Arrangements. 
Pricing Matrix: Economy Direct Driven Drum Lid Mixers
Mixer Selections (Sizing): Viscosity vs. Tank Volume, etc.

Economy Gear Driven Drum Lid Mounted MixersIndustrial Portable Mixers  manufactures an economy direct driven fixed drum lid mounted portable mixers. We also have numerous other open and closed tank (hermetically seals and pressurized} mixer design mounting options available.  Please reference our mixer specifications and pricing matrix below.

Today's economy direct driven drum lid mounted portable mixing applications demand durable process equipment accompanied by total support for your mixing needs.  We offer a complete line portable mixers.   We provide superior materials of construction throughout to give each mixer the strength & reliability that ensures the performance to the standards of each Industrial Portable Mixer design.

Industrial Portable Mixers Models AQLE top entering open tank fixed mounted mixer with a 316L {Low Carbon} Stainless Steel Drum Lid Assembly.  The motor coupling, located below the mixer mounting base,  will be constructed of 316L {Low Carbon} stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation.  The cast iron  gearbox with commercially standard paint features a 98% efficient high strength single helical gear reduction with a minimum AGMA Service Factor of 1.5 based on motor nameplate.  Please note that our gear reduction is not made from inefficient "soft wear" worm gearing, is not a low quality planetary gear.  The removable agitator/gearbox coupling is constructed of 316LSS stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation.  Please note that non-aligning, non-concentric split couplings are not used.  Standard motor options include: 1750 RPM's either 115/208-230 Volt, 1-phase, IP55, 60 hertz or 208-230/460 Volt, 3-Phase, 50/60 Hertz, IP55, Class F insulated, T3C temperature rise, inverter ready  5:1 constant torque, TEFC (Totally Enclosed Fan Cooled) designs with commercially standard paint.  Available motor upgrades or options include:  

Food grade” high pressure wash down all stainless or with electrostatically white epoxy finish, with tropicalized class F insulation, TENV  or TEFC, and a 1.15 Service Factor  

Explosion Proof - Class I, Group D or C&D, Class II, Group F&G, T3C)  

Intrinsically safe {suitable for explosion proof environments) variable speed rotary vane or piston type air motors totally enclosed with air muffler.

AC & DC variable speed motor options.

The agitator shaft is measured from the mixers mounting and is supplied with maximum effect folding propeller(s) as specified in the pricing table.  All wetted parts will be constructed of 316L {Low Carbon} Stainless Steel (with 316SS hardware).    Each mixers nameplate will specifically state, "Manufactured in USA" and will be built with pride and dedication.  Motor/gearbox chemical resistant paint optional upgrade is available upon request.  See pricing link above.

01.28.13

Industrial Portable Mixers 
2715 Tuller Parkway| Dublin, OH 43017-2013 USA
Phone: (717) 614-1524 | Fax: (636) 548-1734 
Web Site: www.industrialportablemixer.com