| |
03.22.08
Used & Rebuilt Mixers for Sale:
Fixed Mounted Top Entering
Industrial Mixers.
Industrial
Portable Mixers From time to
time has a few used
mixers that are presently in stock that are available for immediate shipment at a fraction
of the cost of a new mixer. They are available on a first come first serve
basis. These
mixers may have been demo units (no service), which have little to no service life,
or they are cosmetically challenged, or
have been rebuilt. Some have either very little to limited service
life. These are available with numerous options and will be supplied
with a three (3) year factory warranty.
Terms
& Conditions for Sales & Invoicing
Questions: industrialportablemixer@verizon.net
Mixer #1:
History: This one (1) mixer was previously sold to a pizza shop to
make batches of pizza sauce from paste. It was never put into service and
was returned. It is virtually brand new. This mixer does not have a
motor nameplate.
Specification Mixer #1:
Model AQG top entering open tank swivel mounted mixer with a heavy gage
high strength cast aluminum housing with oversized bearings with your choice of
either an aluminum cup-plate (horizontal mounting surface/bolt on) or C-clamp
(vertical mounting surface) for mounting to a suitable support structure.
This will achieve and adjustment of 90o vertical from vertical with a
360o swing (horizontal plane). The gearbox is equipped with a
high strength (4140 steel) single helical 5:1 gear reduction. Please note
this is not low quality planetary gearing. The motor is 1/3 horsepower,
1750 RPM, 115/208-230 volt, 60 hertz, 1 phase, chemical duty & energy
savings, TEFC, with 1.15 service factor with three (3) prong plug (110 single
phase), on/off toggle switch & 6' of cord. The one-piece output shaft
is precision aligned with the housing, bearings, and gearing. Please note
that non-aligning, non-concentric couplings are not used. The output shaft
features a quick release chuck for precise alignment to minimize shaft
deflection and enable ease of installation. The 3/4" diameter shaft
will be cut to whatever length you require, with a maximum length of 72"
measured from the mixers mounting base with a single 9.0" diameter three
bladed super pitched prop. All wetted parts are constructed of 316L
{Low Carbon) Stainless Steel with 316SS hardware. The mixers nameplate
specifically states, "Manufactured in USA" and will be built with
pride and dedication. The warranty extends three (3) years from the ship
date.
Pricing Mixer #1
| Shaft Length, FMB |
List Price New |
Discounted Price |
| 48" |
$2,018 |
$907 |
| 60" |
$2,045 |
$921 |
| *72" |
$2,111 |
$1,013 |
* - includes stabilizer ring on propeller
This page updated on Saturday, March 22, 2008 08:52:45 PM
|
