Industrial Mixers
"CONTACT US" Additional Information
Index of Information Industrial Mixers Contact Industrial Portable Mixers Industrial Mixer Products About IPM Complete order information Site Map: Industrial Mixers
Bung Mounted Drum Barrel Mixer Selections
Economy Direct Driven Portable Mixers
Portable Mixers
Top Entering Mixers
Mixer Selection Guide
Tips: Designing a Mixing System
Request a catalog.
Quick Electron Quote
Instructions for obtaining Adobe Documents.
Hydrofoil Mixers


Model PG, POG, PSG, PMG and the Cheap-Stir Mixers comparable design equivalents  
Industrial Portable Mixers  If you presently have a mixer model PG, POG, PSG or PMG, and your looking to upgrade to a comparable Industrial Portable Mixer Model AQG equivalent, we have the following table of comparisons for your consideration.  Hit any blue link for additional information for our Cheap-Stir Mixers designs

Industrial Portable Mixers Mixer "Model AQG" INFORMATION (Hot Link)       

Competitors Model PG to Industrial Portable Mixers Model AQG Equivalent Design
Motor Horse Power Equivalent Clamp or Cup-Mounted Swivel Mounts  Equivalent fixed plate mount or 10o angle riser Equivalent flanged stuffing box  Equivalent flanged mechanical sealed design
Model PG Model AQG Model POG Model AQOG Model PSG Model AQSG Model PMG Model AQMG
0.25 PG-14 AQG-25 POG-14 AQOG-25 PSG-14 AQSG-25 PMG-14 AQMG-25
0.33 PG-13 AQG-33 POG-13 AQOG-33 PSG-13 AQSG-33 PMG-13 AQMG-33
0.50 PG-12 AQG-50 POG-12 AQOG-50 PSG-12 AQSG-50 PMG-12 AQMG-50
0.75 PG-34 AQG-75 POG-34 AQOG-75 PSG-34 AQSG-75 PMG-34 AQMG-75
1.0 PG-11 AQG-100 POG-11 AQOG-100 PSG-11 AQSG-100 PMG-11 AQMG-100
1.5 PG-15 AQG-150 POG-15 AQOG-150 PSG-15 AQSG-150 PMG-15 AQMG-150
2.0 PG-2 AQG-200 POG-2 AQOG-200 PSG-2 AQSG-200 PMG-2 AQMG-200
3.0 PG-3 AQG-300 POG-3 AQOG-300 PSG-3 AQSG-300 PMG-3 AQMG-300

Within each model, there are numerous standard options available.  For example:

 the swivel mounted PG design features both a C-Clamp and bolt-on cup-plate mounting options.  
The POG features both a fixed mounted plate and angle riser mounting options.  
The PSG features both a high pressure and low pressure stuffing box sealed option, as well as 5", 6" & 8" 150# ANSI flange mounting options. 
The PMG features numerous mechanical sealed variations.  The two primary mechanical seal designs used were a single dry running  and a double lubricated mechanical seal designs.  A 5", 6" & 8" 150# ANSI flange mounting options were also available.

Industrial Portable Mixers has all of the above options available ... just specify your requirements.  Industrial Portable Mixer "Model AQG" INFORMATION

Industrial Portable Mixers Model designations:

AQ - Cheap Stir Mixer
Model AQG: G - Gear Driven Portable design
Model AQOG: O - Open tank fixed mounted design, either base plated or angle riser design.
Model AQSG: S - Stuffing box, either high or low pressure design
Model AQMG: M - Mechanical Seal design.   

Competitors Mixers Model designations:

P -  Portable Mixer designation
G - Model PG Gear Driven Portable design
Model POG: O - Open tank fixed mounted design, either base plated or angle riser design.
Model PSG: S - Stuffing box, either high or low pressure design
Model PMG: M - Mechanical Seal design.   
01.28.13

Industrial Portable Mixers 
2715 Tuller Parkway| Dublin, OH 43017-2013 USA
Phone: (717) 614-1524 | Fax: (636) 548-1734 
Web Site: www.industrialportablemixer.com