Industrial Mixers
"CONTACT US" Additional Information
Index of Information Industrial Mixers Contact Industrial Portable Mixers Industrial Mixer Products About IPM Complete order information Site Map: Industrial Mixers
Bung Mounted Drum Barrel Mixer Selections
Economy Direct Driven Portable Mixers
Portable Mixers
Top Entering Mixers
Mixer Selection Guide
Tips: Designing a Mixing System
Request a catalog.
Quick Electron Quote
Instructions for obtaining Adobe Documents.
Hydrofoil Mixers

Low Speed RPM Low Headroom Low Pressure 0-3 PSIG Hermetically Seals ANSI Drilled Base Plate Mixers Model AQH3X - Specifications
Low Speed RPM Fixed Plate or Angle Riser Mounted Mixers
Low Speed Hermetically Sealed ANSI Drilled Base Plate
Mixer Selections (Sizing): Viscosity vs. Tank Volume, etc.

Industrial Portable MixersHeavy Duty Gear Driven Fixed Flanged Plate Mounted Mixers manufactures Low Speed RPM Low Headroom 0-3 PSIG Low Pressure Hermetically Sealed ANSI Drilled Base Plate mounted double helical parallel shaft gear driven mixers.  We also have numerous other open and closed tank (hermetically seals and pressurized} mixer design mounting options available.  Please reference our mixer specifications and pricing matrix below.  

Today's gear driven portable mixing applications demand durable process equipment accompanied by total support for your mixing needs.  We offer a complete line portable mixers.   We provide superior materials of construction throughout to give each mixer the strength & reliability that ensures the performance to the standards of each Industrial Portable Mixer design.   

Industrial Portable Mixer Model AQH3X is our heavy duty gear driven top entering closed tank fixed mounted non-painted corrosion resistant mixer design which is completely constructed of both aluminum and stainless steel components which is suitable for 95%+ of all mixing applications. The ACUMIX Model AQO3X features a heavy gage high strength cast aluminum housing with oversized bearings and all external stainless steel hardware. Our 0 to 3 PSIG Hermetically Sealed ANSI drilled base plate is constructed of 316L {low carbon} stainless steel with 316SS hardware for mounting to a suitable mixer support structure.   The ACUMIX Model AQO3X features a 96% efficient double helical gear reduction with gearing that is constructed of high strength 86L20 carburized and hardened steel with an AGMA Service Factor of that meets or exceeds 1.5 based upon the motor nameplate rating (SF > 1.5 is classified moderate shock, continuous 24 hour per day). We comply with AGMA’s strict requirement that no gear reduction exceeds a ratio of 7:1. The model AQO3X provides a flexible motor coupling interface between the motor and gearing to ensure alignment and provide ease of installation and also to absorb inherent shock loads to safeguard the overall life of the mixer.  The L10 bearing life either meets or exceeds 100,000 hours (11.4 years) when the mixer is fully loaded 24/7.  The oversized bearings are designed to achieve superior L10 bearing lives ensuring long lasting mixer life.  Please note that our gear reduction is not made from inefficient “soft-wear” worm gearing or cheap planetary gearing.  Our design is of single purpose high reliability construction where it is not adapted modularly with dual purpose components such as matching cheap commercially available gear-motor assemblies that have inherent design limitations.  The single purpose solid one-piece gearbox output shaft is precision aligned with the gearbox housing, bearings and gearing to ensure precise alignment to minimize run out.  Please note that non-aligning, non-concentric split couplings are never used.  To enable ease of installation the solid one-piece output shaft features either a precision quick release {hollow shaft} chuck or a flanged rigid/removable coupling assembly configuration that is constructed either out of high alloy {strength} carbon steel or an optional 316L {Low Carbon} stainless steel with 316SS hardware.  The flanged rigid removable coupling assembly features a rigid flanged coupling half, as part of the solid one-piece output shaft, with a precise face rabbet to assure alignment, and a removable flanged coupling, which ensures a precision alignment with the gearbox housing, bearings, and gearing to minimize agitator shaft deflection and gearbox tolerance run out. The coupling assembly also enables ease of installation. Also included are corrosion resistant brass & stainless fittings for lube points and also features a pressure release and a clear shatter resistant plastic lube site.  The pressure release normalize the internal heated oil pressure as it expands from a cold start, where the clear lube site will allow you to externally observe the gearboxes oil level.  The agitator shaft is measured from the mixers mounting base.  Numerous impeller configurations for high flow or shear capability are available from stock.  Standard motor options include: 1750 RPM's either 115/208-230 Volt, 1-phase, IP55, 60 hertz or 208-230/460 Volt, 3-Phase, 50/60 Hertz, IP55, Class F insulated, T3C temperature rise, inverter ready  5:1 constant torque, TEFC (Totally Enclosed Fan Cooled) designs with commercially standard paint.  Available motor upgrades or options include:

Food grade” high pressure wash down all stainless or with electrostatically white epoxy finish, with tropicalized class F insulation, TENV  or TEFC, and a 1.15 Service Factor  

Explosion Proof - Class I, Group D or C&D, Class II, Group F&G, T3C)  

Intrinsically safe {suitable for explosion proof environments) variable speed rotary vane or piston type air motors totally enclosed with air muffler.

AC & DC variable speed motor options.

All wetted parts will be constructed of the superior corrosion resistant 316L {Low Carbon} Stainless Steel with 316SS hardware.  Each mixers nameplate will specifically state, "Manufactured in USA" and will be built with pride and dedication.  Some application such as for food processing are available unpainted where an optional upgrade to paint the motor & gearbox with a chemical resistant paint option is available upon request.  Please note, these mixers are far from common cheap throw away designs.  After years of reliable service, these mixer are designed to be easily and reliably rebuilt and put back into service.  

01.27.13

Industrial Portable Mixers 
2715 Tuller Parkway| Dublin, OH 43017-2013 USA
Phone: (717) 614-1524 | Fax: (636) 548-1734 
Web Site: www.industrialportablemixer.com