Industrial Mixers
"CONTACT US" Additional Information
Index of Information Industrial Mixers Contact Industrial Portable Mixers Industrial Mixer Products About IPM Complete order information Site Map: Industrial Mixers
Bung Mounted Drum Barrel Mixer Selections
Economy Direct Driven Portable Mixers
Portable Mixers
Top Entering Mixers
Mixer Selection Guide
Tips: Designing a Mixing System
Request a catalog.
Quick Electron Quote
Instructions for obtaining Adobe Documents.
Hydrofoil Mixers
-
All Lengths
48"/60"
60"/72"/84"/98"
60"/72"/100"/110"
Flanged or Plate Mount: Heavy DutyGear Driven Fixed Mounted Mixers
Angle Riser: Angular Offset Fixed Mounted Heavy Duty Gear Driven Mixers
Hermetic Seal: Heavy Duty Gear Driven Fixed Flanged Plate Mounted Mixers
98"/108"
Stuffing Box Sealed Mixers: Heavy Duty Gear Driven Fixed Flanged Mounted Mixers
Mechanical Sealed Mixers: Heavy Duty Gear Driven Fixed Flanged Mounted Mixers

Industrial Portable Mixers Model AQTG is our heavy duty gear driven top entering open tank swivel mounted mixer.  Model AQTG features heavy gage high strength cast aluminum housing with oversized bearings.   The 3” or 4" 16AMP adapter is constructed of 316L {Low Carbon} Stainless Steel for mounting to a suitable tank welding ferrule.  The tank ferrule can be located using an angular offset mounting arrangement, which eliminates the need for in-tank anti-swirl baffles to eliminate potential in-tank sites for contamination or hang-up. The sanitary adapter assembly configuration will achieve a hermetically sealed tank environment, which is generally 0-3 PSIG.  Also included is a serviceable excluder trap to provide a physical barrier to exclude foreign matter and hardware.  The ACUMIX Model AQTG features a 98% efficient single helical gear reduction of 5:1.  They gears are constructed of high strength (4140 Steel) with a AGMA Service Factor that readily exceeds 1.5 based on the motor nameplate rating (SF > 1.5 is classified moderate shock, continuous 24 hour per day).  The gear box assembly shall be supplied with food grade lubricant.  The L10 bearing life of the Model AQTG mixer assembly readily exceeds 100,000 hours {11.41 years}.  Please note that our gear reduction is not made from inefficient “soft-wear” worm gearing, cheap planetary gearing, nor is our design adapted to a cheap commercially available gear-motor assembly.   The motor is an energy savings  high pressure wash down 208-230/460 Volt, 60 Hertz, 3 Phase, either TENV (Non-Ventilated) or TEFC (Fan Cooled) design with an electrostatically applied white epoxy finish with tropicalized class F insulation and a 1.15 Service Factor.  Motor options include single phase, premium efficient, intrinsically safe variable speed air motors and variable speed motor options.  Un unpainted corrosion resistant design using external stainless steel hardware with an all stainless motor is also available.  The solid one-piece output shaft features our ACUMIX quick release chuck design, which is constructed of 316L {low carbon} stainless steel with 316SS external hardware.  This output shaft design is precision aligned with the housing, bearings, and gearing to minimize shaft deflection and enable ease of installation.  Please note that non-aligning, non-concentric split couplings are not used.  The agitator shaft length is as indicated with a single (1) removable three bladed high efficiency hydrofoil impeller with inherent stabilization.  We have available numerous other impeller options suitable for high viscosity, dispersion with additional types for various other process conditions.  All wetted parts will be constructed of 316L {Low Carbon) Stainless Steel with 316SS hardware.  Each mixer will be Manufactured in USA and will be built with pride and dedication.  Additional features include:

Non-painted corrosion resistant designs.
USDA and/or food grade coatings for the motor- gearbox assemblies to protect against corrosive external environments.
Food grade agitator shaft & impeller coatings to either protect against salts and brines or to provide addition protection to ward off verdigrees.
Polished surfaces for the agitator shaft and impeller assemblies for easy clean-up. 
All stainless steel 230/460 Volt electric wash down duty motors
04.08.13

Industrial Portable Mixers 
2715 Tuller Parkway| Dublin, OH 43017-2013 USA
Phone: (717) 614-1524 | Fax: (636) 548-1734 
Web Site: www.industrialportablemixer.com